TM-9-2320-209-34-2-2

2½-TON, 6X6, M44A1 AND M44A2 SERIES TRUCKS (MULTIFUEL)

TECHNICAL MANUAL; MAINTENANCE; DIRECT SUPPORT AND GENERAL SUPPORT LEVEL; VOLUME 2 OF 2; PART 2 OF 3

MAY 1981

TM-9-2320-209-34-2-2 - Page 392 of 899

TM 9-2320-209-34-2-2

17-33. WATER DISCHARGE PIPE REPAIR (TRUCKS M50A2 AND M50A3).

TOOLS:

No special tools required

SUPPLIES:

Solvent, dry cleaning, type II (SD-2), Fed. Spec P-D-680

PERSONNEL: One

EQUIPMENT CONDITION:

Truck parked, engine off, handbrake set.

Preliminary Procedure. Remove discharge pipe. Refer to

TM 9-2320-209-20.

b. Cleaning, Inspection, and Repair.

WARNING

Dry cleaning solvent is flammable. Do not use near

an open flame. Keep a fire extinguisher nearby when

solvent is used. Use only in well-ventilated places.

Failure to do this may result in injury to personnel

and damage to equipment.

1.

Clean discharge pipe (1) with dry cleaning solvent.

2.

Check that discharge pipe (1) has no cracks or holes.

3.

If discharge pipe (1) is damaged, throw it away and get new one.

NOTE

Follow-on Maintenance Action Required:

Replace discharge pipe. Refer to TM 9-2320-209-20.

END OF TASK

17-375