TM-9-2320-209-34-2-2

2½-TON, 6X6, M44A1 AND M44A2 SERIES TRUCKS (MULTIFUEL)

TECHNICAL MANUAL; MAINTENANCE; DIRECT SUPPORT AND GENERAL SUPPORT LEVEL; VOLUME 2 OF 2; PART 2 OF 3

MAY 1981

TM-9-2320-209-34-2-2 - Page 414 of 899

TM 9-2320-209-34-2-2

17-38. REAR DOOR HINGES REMOVAL AND REPLACEMENT (TRUCKS M109A2 and

M109A3).

TOOLS:

No special tools required

SUPPLIES: Rivet (20)

PERSONNEL: One

EQUIPMENT CONDITION: Truck parked, engine off, handbrake set.

a.

Preliminary Procedures.

(1) Remove van door

(2) Remove exhaust

b.

Removal.

assembly. Refer

blower assembly.

to TM 9-2320-209-20.

Refer to TM 9-2320-209-20.

FRAME 1

1.

2.

3.

4.

GO

Working at left rear of truck, drive out ten rivet caps (1) along side panel (2).

Drill and take out ten rivets (3).

Take out 14 screws (4) across top and bottom of panel (2)

next to wall (5). Take off panel.

Do steps 1 and 2 again for right rear panel.

TO FRAME 2

and down side

17-397