TM-9-2320-209-34-2-2

2½-TON, 6X6, M44A1 AND M44A2 SERIES TRUCKS (MULTIFUEL)

TECHNICAL MANUAL; MAINTENANCE; DIRECT SUPPORT AND GENERAL SUPPORT LEVEL; VOLUME 2 OF 2; PART 2 OF 3

MAY 1981

TM-9-2320-209-34-2-2 - Page 654 of 899

TM 9-2320-209-34-2-2

c.

Cleaning.

(1) Clean all bearings. Refer to Part 1, para 10-8.

(2) There are no special cleaning procedures needed for all other parts.

Refer to cleaning procedures given in Part 1, para 1-3.

d.

Inspection and Repair.

1.

Check that springs (1) have no distortion, breaks or other damage. If

springs are worn or damaged, get new ones.

2.

Check that nuts (2), screws (3), and threaded holes have no damaged

threads or heads. If parts are damaged, get new nuts and screws and

rethread damaged holes.

3.

Check that two bushings (4) are not scored, chipped or damaged in any other

way. If bushings are damaged, get new ones.

4.

Check that bracket (5), rods (6), levers (7), handles (8), arms (9), and

beams (10) have no cracks, bends or wear. Repair by straightening or

welding. Refer to FM 43-2 and TM 9-237. If more repair is needed, get

new parts.

END OF TASK

17-636