TM-9-2320-209-34-2-2

2½-TON, 6X6, M44A1 AND M44A2 SERIES TRUCKS (MULTIFUEL)

TECHNICAL MANUAL; MAINTENANCE; DIRECT SUPPORT AND GENERAL SUPPORT LEVEL; VOLUME 2 OF 2; PART 2 OF 3

MAY 1981

TM-9-2320-209-34-2-2 - Page 660 of 899

TM 9-2320-209-34-2-2

17-52. FEED AND DRIVE CLUTCH AND BRAKE ASSEMBLIES AND CLUTCH

PINIONS REMOVAL, REPAIR, AND REPLACEMENT (TRUCK M764).

TOOLS:

Hook spanner wrench, pn 11623221

Hook spanner wrench, pn 11623223

SUPPLIES: Brake shell and clutch case cap gasket (2)

Clutch housing-to-throw cam housing gasket (4)

Lubricating oil, ICE, OE/HDO 10, MIL-L-2104

Solvent, dry cleaning, type II (SD-2), Fed. Spec P-D-680

Artillery and automotive grease, type GAA, MIL-G-10924

Safety wire, 0.091-inch diameter

Cotter pin (2)

Cover gasket

PERSONNEL: One

EQUIPMENT CONDITION:

Truck parked, engine off, handbrake set.

a.

Preliminary Procedures.

(1) Remove earth boring case. Refer to para 17-46.

(2) Drain lubricant from clutch and brake gearcase. Refer to

LO 9-2320-209-12/1.

SHAFT

17-642