TM-9-2320-209-34-2-2

2½-TON, 6X6, M44A1 AND M44A2 SERIES TRUCKS (MULTIFUEL)

TECHNICAL MANUAL; MAINTENANCE; DIRECT SUPPORT AND GENERAL SUPPORT LEVEL; VOLUME 2 OF 2; PART 2 OF 3

MAY 1981

TM-9-2320-209-34-2-2 - Page 675 of 899

TM 9-2320-209-34-2-2

c.

Cleaning. There are no special cleaning procedures needed. Refer to

cleaning procedures given in Part 1, para 1-3.

NOTE

Clean all parts before inspection and after repair.

d.

Inspection and Repair.

FRAME 1

1.

Check that clutch case cap ball bearing (1) and two drive sleeve ball

bearings (2) are not worn or scored.

If bearings are damaged, get new ones

in their place.

2.

Check that pressure plate release bearing (3) is not worn or scored. If

bearing is damaged, take out bearing cup (4) and get a new bearing and

bearing cup.

GO TO FRAME 2

17-657