TM-9-2320-209-34-2-2
2½-TON, 6X6, M44A1 AND M44A2 SERIES TRUCKS (MULTIFUEL)
TECHNICAL MANUAL; MAINTENANCE; DIRECT SUPPORT AND GENERAL SUPPORT LEVEL; VOLUME 2 OF 2; PART 2 OF 3
MAY 1981
TM-9-2320-209-34-2-2 - Page 725 of 899
TM 9-2320-209-34-2-2
h.
Test.
FRAME 1
1.
2.
3.
4.
5.
6.
Draw out and pull back outrigger leg (1) two times. Refer to
TM 9-2320-209-10.
Draw out outrigger leg (1).
Note distance between point A and point B.
Wait five minutes, then note distance between point A and point B. If
distance between point A and point B is less than distance noted in step 3,
do the following:
a. Remove outrigger leg. Refer to para 17-54.
b. Remove and disassemble outrigger leg hydraulic cylinder. Refer to
para 17-55b and 17-55c.
c. Inspect and repair outrigger leg hydraulic cylinder. Refer to
para 17-55e.
d. Assemble and replace outrigger leg hydraulic cylinder. Refer to
para 17-55f and 17-55g.
e.
Replace outrigger leg. Refer to para 17-54.
Do steps 1 through 4 again.
Pull back outrigger leg. Refer to TM 9-2320-209-10.
END OF TASK
17-707
Back to Top
