TM-9-2320-209-34-2-2
2½-TON, 6X6, M44A1 AND M44A2 SERIES TRUCKS (MULTIFUEL)
TECHNICAL MANUAL; MAINTENANCE; DIRECT SUPPORT AND GENERAL SUPPORT LEVEL; VOLUME 2 OF 2; PART 2 OF 3
MAY 1981
TM-9-2320-209-34-2-2 - Page 720 of 899
TM 9-2320-209-34-2-2
d.
Cleaning. There are no special cleaning procedures needed. Refer to
cleaning procedures given in Part 1, para 1-3.
e.
Inspection and Repair.
FRAME 1
1.
Check that cylinder rod (1) is not cracked, chipped or bent.
2.
Check that retainer (2) is not chipped or cracked.
3.
Check that sleeve bushing (3) is not burred cracked, scored or grooved.
4.
Check that cylinder head (4) is not chipped or cracked.
5.
Check that two retaining plates (5), two cups (6), and rod follower (7) are not
chipped or cracked.
6.
Check that cylinder (8) is not chipped cracked or dented.
7.
Check that all threaded parts are not stripped or crossthreaded.
8.
If parts are damaged, get new ones.
END OF TASK
17-702
Back to Top
