TM-9-2320-209-34-2-2

2½-TON, 6X6, M44A1 AND M44A2 SERIES TRUCKS (MULTIFUEL)

TECHNICAL MANUAL; MAINTENANCE; DIRECT SUPPORT AND GENERAL SUPPORT LEVEL; VOLUME 2 OF 2; PART 2 OF 3

MAY 1981

TM-9-2320-209-34-2-2 - Page 710 of 899

TM 9-2320-209-34-2-2

d. Cleaning.

There are no special cleaning procedures needed. Refer to

cleaning procedures given in Part 1, para 1-3.

NOTE

CIean all parts before inspection and before assembly.

e.

Inspection and Repair.

FRAME 1

1.

Check that upper leg (1), lower leg (2), shoe (3), pin (4), and latch (5)

have no cracks, bends or broken welds.

Refer

to

TM 9-237 for welding

procedures.

2.

Check that trunnion tube (6) and pin (7) are not worn or damaged. If parts

are damaged or worn, get new ones in their place.

3.

Check that all nuts (8) and bolts (9) have no damaged threads or heads.

If parts are damaged or worn, get new ones in their place.

END OF TASK

17-692