TM-9-2320-209-34-2-2

2½-TON, 6X6, M44A1 AND M44A2 SERIES TRUCKS (MULTIFUEL)

TECHNICAL MANUAL; MAINTENANCE; DIRECT SUPPORT AND GENERAL SUPPORT LEVEL; VOLUME 2 OF 2; PART 2 OF 3

MAY 1981

TM-9-2320-209-34-2-2 - Page 706 of 899

TM 9-2320-209-34-2-2

17-54. OUTRIGGER LEGS REMOVAL, REPAIR, AND REPLACEMENT (TRUCK M764).

NOTE

This task is the same for the left and right

outrigger legs. This task is shown for the

right outrigger leg.

TOOLS:

No special tools required

SUPPLIES:

Tags

Plugs

PERSONNEL: Four

EQUIPMENT CONDITION:

Truck parked, engine off, handbrake set.

a.

Preliminary Procedures.

(1) Take off rear splash shield and braces. Refer to para 17-69.

(2) Jack Up and support rear axle. Refer to TM 9-2320-209-20.

(3) Remove inner and outer rear wheels. Refer to TM 9-2320-209-10.

b.

Removal.

1.

Take off hydraulic cylinder supply hose (1) and return hose (2). Plug and

tag hoses (1 and 2) so they will be put back in the same place.

2.

Take out screw (3) and take off clamp (4) on hoses (1 and 2).

GO TO FRAME 2

17-688