TM-9-2320-209-34-2-2

2½-TON, 6X6, M44A1 AND M44A2 SERIES TRUCKS (MULTIFUEL)

TECHNICAL MANUAL; MAINTENANCE; DIRECT SUPPORT AND GENERAL SUPPORT LEVEL; VOLUME 2 OF 2; PART 2 OF 3

MAY 1981

TM-9-2320-209-34-2-2 - Page 701 of 899

TM 9-2320-209-34-2-2

FRAME 3

1.

Put on spacer (1) and key (2). Put in gear (3).

NOTE

Put in pry bar through hole in housing (4) and press

worm drive gear (5) to keep leveler drive shaft from

turning. This helps in tightening nut (6) at end of

shaft.

2.

Put in flat washer (7), nut (6), and cotter pin (8).

3.

Put grease into housing (4).

GO TO FRAME 4

17-683