TM-9-2320-209-34-2-2

2½-TON, 6X6, M44A1 AND M44A2 SERIES TRUCKS (MULTIFUEL)

TECHNICAL MANUAL; MAINTENANCE; DIRECT SUPPORT AND GENERAL SUPPORT LEVEL; VOLUME 2 OF 2; PART 2 OF 3

MAY 1981

TM-9-2320-209-34-2-2 - Page 695 of 899

TM 9-2320-209-34-2-2

FRAME 3

1.

2.

3.

4.

Slide pry bar into hole in housing (1) and between teeth of worm drive

gear (2) to keep power leveler drive shaft from turning. This helps in

loosening nuts (3) at end of shaft.

Take out cotter pin (4). Take out nut (3), bearing retainer (5) and shim

set (6).

NOTE

Note needed number and thickness of shims (6) to be

sure same shim thickness is put back.

Take off sprocket (7) and roller bearing (8). Pull out bearing (9).

Take out shaft (10).

GO TO FRAME 4

17-677