TM-9-2320-209-34-2-2

2½-TON, 6X6, M44A1 AND M44A2 SERIES TRUCKS (MULTIFUEL)

TECHNICAL MANUAL; MAINTENANCE; DIRECT SUPPORT AND GENERAL SUPPORT LEVEL; VOLUME 2 OF 2; PART 2 OF 3

MAY 1981

TM-9-2320-209-34-2-2 - Page 690 of 899

TM 9-2320-209-34-2-2

17-53. POWER LEVELER REMOVAL, REPAIR, AND REPLACEMENT (TRUCK M764).

TOOLS:

No special tools required.

SUPPLIES: Solvent, dry cleaning, type II (SD-2), Fed. Spec P-D-680

Safety wire, 0.032-inch diameter

Automotive and artillery grease, type GAA, MIL-G-10924

PERSONNEL: One

EQUIPMENT CONDITION:

Truck parked, engine off, handbrake set.

a.

Preliminary Procedures.

(1) Remove vertical leveling worm drive chains. Refer to TM 9-2320-209-20.

(2) Remove horizontal leveling worm drive chains. Refer to TM 9-2320-209-20.

(3) Remove vertical leveling chain tightening shaft. Refer to

TM 9-2320-209-20.

b.

Removal.

FRAME 1

1.

Take out four screws (1) and lockwashers (2).

2.

Take off bracket (3) and spacers (4).

GO TO FRAME 2

17-672