TM-9-2320-209-34-2-2

2½-TON, 6X6, M44A1 AND M44A2 SERIES TRUCKS (MULTIFUEL)

TECHNICAL MANUAL; MAINTENANCE; DIRECT SUPPORT AND GENERAL SUPPORT LEVEL; VOLUME 2 OF 2; PART 2 OF 3

MAY 1981

TM-9-2320-209-34-2-2 - Page 760 of 899

TM 9-2320-209-34-2-2

17-61. CAB PROTECTOR REMOVAL, REPAIR, AND REPLACEMENT (TRUCK M756A2).

TOOLS:

No special tools required

SUPPLIES:

None

PERSONNEL:

T

WO

EQUIPMENT CONDITION:

Truck parked, engine off, handbrake set.

a.

Preliminary Procedure. Take floodlight wiring harness off chassis wiring

harness. Refer to para 7-10.

b.

Removal.

1.

Tag two electrical leads (1) so they can be put back in the same place.

2.

Unplug two electrical leads (1) from connectors (2).

3.

Take handle assembly (3) out of cab protector (4).

4.

Slide floodlight support assembly (5) up and out of cab protector (4).

5.

Do steps 1 through 4 again on other side of cab protector (4).

GO TO FRAME 2

17-742