TM-9-2320-209-34-2-3

2½-TON, 6X6, M44A1 AND M44A2 SERIES TRUCKS (MULTIFUEL)

TECHNICAL MANUAL; MAINTENANCE; DIRECT SUPPORT AND GENERAL SUPPORT LEVEL; VOLUME 2 OF 2; PART 3 OF 3

MAY 1981

TM-9-2320-209-34-2-3 - Page 242 of 592

TM 9-2320-209-34-2-3

FRAME 2

NOTE

Be sure that shifting rod (1) is meshed in third notch of

shifter shaft (2).

1.

Place shifting rod (1) in third notch of shifter shaft (2). If needed, screw in

shifter shaft until shifting rod catches shaft.

2.

Take out cotter pin (3) and loosen nut (4) holding flange (5) on shaft

assembly (6).

3.

Take out four capscrews (7) and washers (8).

4.

Loosen bearing cap (9) from housing (10) by pulling on flange (5).

5.

Take out shaft assembly (6). Be careful not to lose or damage shims (11).

GO TO FRAME 3

18-231