TM-9-2320-209-34-2-3

2½-TON, 6X6, M44A1 AND M44A2 SERIES TRUCKS (MULTIFUEL)

TECHNICAL MANUAL; MAINTENANCE; DIRECT SUPPORT AND GENERAL SUPPORT LEVEL; VOLUME 2 OF 2; PART 3 OF 3

MAY 1981

TM-9-2320-209-34-2-3 - Page 235 of 592

TM 9-2320-209-34-2-3

18-12. POWER DIVIDER REMOVAL, REPAIR, AND REPLACEMENT (TRUCK M764).

TOOLS:

No special tools required

SUPPLIES:

Housing gasket

Lubricating oil, ICE, OE/HDO-10, MIL-L-2104

Crocus cloth, type J

Cotter pins

Solvent, dry cleaning, type II (SD-2), Fed. Spec P-D-680

Gear lubricating oil, GO 80/90, MIL-L-2105

PERSONNEL: T

W O

EQUIPMENT CONDITION:

Truck parked, engine off, handbrake set.

a. Preliminary Procedures.

(1) Remove power divider propeller shaft. Refer to TM 9-2320-209-20.

(2) Remove earth boring machine propeller shaft. Refer to TM 9-2320-209-20.

(3) Remove transfer-to-forward-rear axle propeller shaft. Refer to Propeller

Shaft and Universal Joint Removal and Replacement, TM 9-2320-209-20.

(4) Vent air system pressure. Refer to TM 9-2320-209-20.

18-224