TM-9-2320-209-34-2-3

2½-TON, 6X6, M44A1 AND M44A2 SERIES TRUCKS (MULTIFUEL)

TECHNICAL MANUAL; MAINTENANCE; DIRECT SUPPORT AND GENERAL SUPPORT LEVEL; VOLUME 2 OF 2; PART 3 OF 3

MAY 1981

TM-9-2320-209-34-2-3 - Page 225 of 592

TM 9-2320-209-34-2-3

18-10. CONTROL VALVE REMOVAL AND REPLACEMENT (TRUCK M342A2).

TOOLS:

No special tools required

SUPPLIES:

Control valve gasket

PERSONNEL: One

EQUIPMENT CONDITION:

Truck parked, engine off, handbrake set.

a.

Preliminary Procedures.

(1) Raise and brace dump body. Refer to TM 9-2320-209-10.

(2) Drain hydraulic reservoir. Refer to LO 9-2320-209-20-12/1.

(3) Remove power takeoff propeller shaft. Refer to Propeller Shaft and

Universal Joint Removal and Replacement, TM 9-2320-209-20.

(4) Remove hydraulic pump adapter and spacer. Refer to para 18-9.

b. Removal.

FRAME 1

1.

Unscrew and takeoff locknut (1) and takeout screw (2).

2.

Take hoist control valve lever (3) off control box (4) and trunnion (5).

GO TO FRAME 2

18-214