TM-9-2320-209-34-2-3

2½-TON, 6X6, M44A1 AND M44A2 SERIES TRUCKS (MULTIFUEL)

TECHNICAL MANUAL; MAINTENANCE; DIRECT SUPPORT AND GENERAL SUPPORT LEVEL; VOLUME 2 OF 2; PART 3 OF 3

MAY 1981

TM-9-2320-209-34-2-3 - Page 230 of 592

TM 9-2320-209-34-2-3

a. Removal.

FRAME 1

NOTE

Input shaft and rear output shaft oil seals can be

worked on with power divider in truck.

1.

Take out four bolts (1), washers (2), and nuts (3).

2.

Take off propeller shaft (4) from companion flange (5).

3.

Take out drain plug (6) and drain enough oil to half fill a one-gallon container.

Put oil in an approved disposal area.

4.

Put in drain plug (6).

GO TO FRAME 2

18-219