TM-9-2320-209-34-2-3

2½-TON, 6X6, M44A1 AND M44A2 SERIES TRUCKS (MULTIFUEL)

TECHNICAL MANUAL; MAINTENANCE; DIRECT SUPPORT AND GENERAL SUPPORT LEVEL; VOLUME 2 OF 2; PART 3 OF 3

MAY 1981

TM-9-2320-209-34-2-3 - Page 220 of 592

TM 9-2320-209-34-2-3

d.

Cleaning.

(1) Clean bearings.

Refer to Part 1, para 10-8.

WARNING

Dry cleaning solvent is flammable. Do not use

near an open flame. Keep a fire extinguisher

nearby when solvent is used. Use only in well-

ventilated places. Failure to do this may result

in injury to personnel and damage to equipment.

(2) Clean all other parts in solvent.

FRAME 1

1.

Check that front end cover (1), pump body (2), and rear end cover (3) are

not cracked or broken, and that bores are not scored or worn.

2.

Check that

3.

Check that

teeth.

4.

Check that

scored.

5.

Check that

6.

Check that

END OF TASK

two wear plates (4) have no nicks, burrs or deep scratches.

two gears (5) have no nicks, burrs, deep scratches or broken

drive gearshaft (6) and driven gearshaft (7) are not cracked or

four bearings (8) are not damaged. Refer to Part 1, para 10-8.

four pins (9) have no nicks, burrs, or deep scratches.

18-209