TM-9-2320-209-34-2-3

2½-TON, 6X6, M44A1 AND M44A2 SERIES TRUCKS (MULTIFUEL)

TECHNICAL MANUAL; MAINTENANCE; DIRECT SUPPORT AND GENERAL SUPPORT LEVEL; VOLUME 2 OF 2; PART 3 OF 3

MAY 1981

TM-9-2320-209-34-2-3 - Page 212 of 592

TM 9-2320-209-34-2-3

FRAME 4

1.

2.

3.

4.

5.

6.

7.

8.

Put a coat of oil in bore of cylinder assembly (1).

Carefully clamp closed end of cylinder assembly (1) in vise with soft jaw caps.

Carefully push piston rod assembly (2) into bore of cylinder assembly (1).

Take off ring compressor.

Put preformed packing (3) in place on cylinder head (4).

Slide cylinder head (4) with preformed packing (3) into place on piston rod

assembly (2) and against cylinder assembly (1). Line up screw holes.

Put in 10 screws (5) with washers (6).

Tighten screws (5) to 35 pound-feet in tightening order shown.

GO TO FRAME 5

18-201