TM-9-2320-209-34-2-3
2½-TON, 6X6, M44A1 AND M44A2 SERIES TRUCKS (MULTIFUEL)
TECHNICAL MANUAL; MAINTENANCE; DIRECT SUPPORT AND GENERAL SUPPORT LEVEL; VOLUME 2 OF 2; PART 3 OF 3
MAY 1981
TM-9-2320-209-34-2-3 - Page 216 of 592
TM 9-2320-209-34-2-3
18-9. HYDRAULIC HOIST PUMP ASSEMBLY REMOVAL, REPAIR, AND REPLACEMENT
(TRUCK M342A2).
TOOLS:
No special tools required
SUPPLIES:
None
PERSONNEL: T
W O
EQUIPMENT CONDITION:
Truck parked, engine off, handbrake set.
a.
Preliminary Procedures.
(1) Drain hydraulic reservoir. Refer to LO 9-2320-209-12/1.
(2) Take power takeoff-to-pump propeller shaft off hoist pump assembly.
Refer to TM 9-2320-209-20.
b. Removal.
FRAME 1
Soldier A
1.
Put container under pump assembly (1) before taking it off.
2. Working under
Soldier B
3.
Working under
Soldiers
4. Take out pump
A and B
END OF TASK
truck, hold pump assembly (1).
truck, take out six screws (2) and lockwashers (3).
assembly (1) and gasket (4). Throw away gasket.
18-205
Back to Top
