TM-9-2320-209-34-2-3

2½-TON, 6X6, M44A1 AND M44A2 SERIES TRUCKS (MULTIFUEL)

TECHNICAL MANUAL; MAINTENANCE; DIRECT SUPPORT AND GENERAL SUPPORT LEVEL; VOLUME 2 OF 2; PART 3 OF 3

MAY 1981

TM-9-2320-209-34-2-3 - Page 355 of 592

TM 9-2320-209-34-2-3

FRAME 3

1.

2.

3.

4.

5.

Tag flame detector switch common electrical lead (1). Unscrew and take out

terminal screw (2) from flame detector switch (3).

Tag terminal screw (2) the same as electrical lead (1). Screw terminal screw

(2) with tag into flame detector switch (3).

Do steps one and two again for switch middle electrical leads (4 and 5) and

switch end electrical leads (6 and 7).

Unscrew fitting (8) under flame detector switch (3).

CAUTION

Use care in pulling flame detector switch out. If switch

is not pulled straight out, parts in switch will break.

Pull flame, detector switch (3) out of housing (9).

GO TO FRAME 4

21-20