TM-9-2320-260-10

TRUCK, 5-TON, 6X6, M809 SERIES (DIESEL)

TECHNICAL MANUAL; OPERATOR'S MANUAL

JUNE 1985

TM-9-2320-260-10 - Page 146 of 411

Change 4

2-71

TM 9-2320-260-10

Table 2-2. Preventive Maintenance Checks and Services (Cont’d).

ITEM

NO.

INTERVAL

ITEM TO

CHECK/

SERVICE

CREWMEMBER

PROCEDURE

NOT FULLY

MISSION

CAPABLE IF:

LOCATION

DRIVER

96

Monthly Van

Inspect liftgate (3), lift arms, and

Bends, breaks, or

Hydraulic

support assemblies for bends, breaks,

missing parts.

Liftgate

and missing parts.

DRIVER

97

Monthly Front

a.

Check shearpin (5) for presence

Winch

and condition. (Shearpin connects

U-joint yoke and winch drive shaft.)

It is retained with cotter pins (4).

b.

Check PTO and drive shaft for

mounting and completeness.

DRIVER

98

Monthly M815

Vehicle is not ready/

Midships

available if mission

Winch

requires bolster

operation.

3

NOTE

Front and midships winch controls

are identical. Follow front winch

operation checks a. and b. in

preceding item for midships winch.

NOTE

Replace with

proper shearpin if

missing, broken,

cracked, or

improper shearpin

is used.

4

5