TM-9-2320-260-10
TRUCK, 5-TON, 6X6, M809 SERIES (DIESEL)
TECHNICAL MANUAL; OPERATOR'S MANUAL
JUNE 1985
TM-9-2320-260-10 - Page 83 of 411
2-38
Change 4
TM 9-2320-260-10
Table 2-2. Preventive Maintenance Checks and Services.
ITEM
NO.
INTERVAL
ITEM TO
CHECK/
SERVICE
CREWMEMBER
PROCEDURE
NOT FULLY
MISSION
CAPABLE IF:
LOCATION
Perform all before, during, after, and
weekly checks if:
a.
You are the assigned driver
but have not operated the vehicle
since the last weekly inspection.
b.
You are operating the vehicle for
the first time.
WARNING
HIGH INTENSITYNOISE
Hearing protection is required for
all personnel working in and around
this vehicle with the engine running.
NOTE
Always remember the CAUTIONS,
WARNINGS, and NOTES before
operating this vehicle and prior to
P M C S
.
NOTE
These checks are to be made in the order listed, within designated
i n t e r v a l .
Walk-around inspections will begin at the front of the vehicle and proceed around the
crewmember’s side (right side), around the rear of the vehicle, and continue up the driver’s
side (left side). If inspection items are found in more than one location, cover the entire
vehicle. Reinspection is required after a change in engine run-up condition, and is not
complete until all areas have been inspected or reinspected.
2-10.1. PMCS TABLE
STARTING
POINT
Back to Top
