TM-9-2320-260-10
TRUCK, 5-TON, 6X6, M809 SERIES (DIESEL)
TECHNICAL MANUAL; OPERATOR'S MANUAL
JUNE 1985
TM-9-2320-260-10 - Page 89 of 411
2-44
Change 4
TM 9-2320-260-10
Table 2-2. Preventive Maintenance Checks and Services (Cont’d).
ITEM
NO.
INTERVAL
ITEM TO
CHECK/
SERVICE
CREWMEMBER
PROCEDURE
NOT FULLY
MISSION
CAPABLE IF:
LOCATION
DRIVER
8
Before
Rear
a.
Visually check winch hoses and
a.
Any class III
Winch
lines for signs of deterioration and
leak is evident.
leakage.
b.
Check cable (1) for kinks, frays,
b.
Cable has
breaks, and if missing.
kinks, frays, breaks,
or is missing.
c
.
Clean and oil cable (1) after each
operation. If used infrequently or in
very damp or salty condition, perform
lubrication (LO 9-2320-260-12). Do
not lubricate cable (1) in dry, dusty
c o n d i t i o n s
.
.
WARNING
.
Wear hand protection when
handling cable. Do not handle cable
with bare hands. Broken wires will
cause injury.
NOTE
Item 8 applies to M816 models
only.
LUBRICANTS
CW- Lubricating Oil
(VV-L-751)
CW-11C
CW-11B
CW-11A
GO75
Above +80°F
+80 TO + 30°F
+30 TO -30°F
-30 TO -65°F
(+27°C)
(+27 TO -1°C)
(-1 TO -34°C)
(-34 TO -54°C)
EXPECTED TEMPERATURES
1
Back to Top
