TM-9-2320-260-20

TRUCK, 5-TON, 6X6, M809 SERIES (DIESEL)

TECHNICAL MANUAL; UNIT MAINTENANCE

APRIL 1995

TM-9-2320-260-20 - Page 1082 of 1337

TM 9-2320-260-20

I

13-46. TRACTOR WRECKER HYDRAULIC PUMP PROPELLER SHAFT MAINTENANCE

I

THIS TASK COVERS:

a Removal

c. Installation

b. Inspection

INITIAL SETUP

APPLICABLE MODELS

REFERENCES (TM)

M819

TM 9-2320-260-10

MATERIALS/PARTS

TM 9-2320-260-20P

Four lockplates

EQUIPMENT CONDITION

Parking brake set (TM 9-2320-260-10).

1. Bend tabs on four lockplates (2) and remove eight screws (1) from two U-joints (4) and flanges (3).

Discard lockplates (2).

2. Remove two U-joints (4) and propeller shaft (5) from two flanges (3).

Inspect universal joints (3) for looseness or roughness. Replace universal joints (3) if damaged

(para. 7-5).

1. Position propeller shaft (5) with two U-joints (4) on flanges (3).

2. Install two U-joints (4) on flanges (3) with four new lockplates (2) and eight screws (1).

3. Bend tabs on four lockplates (2) against eight screws (1).

13-109