TM-9-2320-260-20

TRUCK, 5-TON, 6X6, M809 SERIES (DIESEL)

TECHNICAL MANUAL; UNIT MAINTENANCE

APRIL 1995

TM-9-2320-260-20 - Page 1085 of 1337

TM 9-2320-260-20

I

13-48. VAN LIFTGATE SAFETY LATCH REPLACEMENT

THIS TASK COVERS:

a. Removal

b. Installation

INITIAL SETUP

APPLICABLE MODELS

REFERENCES (TM)

M820A2

TM 9-2320-260-10

MATERIALS/PARTS

TM 9-2320-260-20P

Cotter pin

EQUIPMENT CONDITION

•

Parking brake set (TM 9-2320-260-10).

• Liftgate lowered to ground level

(TM 9-2320-260-10).

The left and right latches are replaced the same way. This

procedure covers the left side only.

1. Remove cotter pin (3) from control lever (5). Discard cotter pin (3).

2. Remove two snaprings (4) from retaining pin (10).

3. Remove retaining pin (10) and two spacers (2) from safety latch (1).

4. Remove jamnut (8), nut (7), washer (6), and control lever (5) from angle linkage (9).

5. Remove safety latch (1) from control lever (5).

1. Position safety latch (1) on control lever (5).

2. Install control lever (5) on angle linkage (9) with washer (6), nut (7), and jamnut (8).

3. Install retaining pin (10) on safety latch (1) with two spacers (2) and snaprings (4).

4. Install new cotter pin (3) on control lever (5).

13-112