TM-9-2320-260-20

TRUCK, 5-TON, 6X6, M809 SERIES (DIESEL)

TECHNICAL MANUAL; UNIT MAINTENANCE

APRIL 1995

TM-9-2320-260-20 - Page 1155 of 1337

TM 9-2320-260-20

14-19. OIL PAN SHROUD AND EXHAUST TUBE REPLACEMENT

THIS TASK COVERS:

a. Removal

b. Installation

INITIAL SETUP

APPLICABLE MODELS

REFERENCES (TM)

All

TM 9-2320-260-10

MATERIALS/PARTS

Five locknuts

TM 9-2320-260-20P

EQUIPMENT CONDITION

Two cotter pins

Parking brake set (TM 9-2320-260-10).

GENERAL SAFETY INSTRUCTIONS

Do not perform this task when exhaust system is hot.

WARNING

Do not touch hot exhaust system components with bare hands.

Injury to personnel may result.

1. Remove two cotter pins (7) and exhaust tube (8) from heater (11) and oil pan shroud (4). Discard

cotter pins (7).

2. Remove locknut (2), screw (1), clamp (10), and exhaust tube (8) from crossmember (9). Discard

locknut (2).

3. Remove four locknuts (6), washers (5), and oil pan shroud (4) from engine oil pan (3). Discard

locknuts (6).

1. Install oil pan shroud (4) on engine oil pan (3) with four washers (5) and new locknuts (6).

2. Install exhaust tube (8) on heater (11) and oil pan shroud (4) with two new cotter pins (7).

3. Install exhaust tube (8) on crossmember (9) with clamp (10), screw (1), and new locknut (2).

14-38