TM-9-2320-260-20

TRUCK, 5-TON, 6X6, M809 SERIES (DIESEL)

TECHNICAL MANUAL; UNIT MAINTENANCE

APRIL 1995

TM-9-2320-260-20 - Page 1231 of 1337

TM 9-2320-260-20

I

14-59. CONVOY WARNING LIGHT SWITCH REPLACEMENT

THIS TASK COVERS:

a. Removal

b. Installation

INITIAL SETUP

APPLICABLE MODELS

REFERENCES (TM)

All

TM 9-2320-260-10

MATERIALS/PARTS

Two locknuts

Two lockwashers

TM 9-2320-260-20P

EQUIPMENT CONDITION

•

Parking brake set (TM 9-2320-260-10).

• Battery ground cable disconnected (para. 4-48).

1.

Remove screw (8), lockwasher (7), and lever (6) from switch (11). Discard lockwasher (7).

2. Remove nut (5), lockwasher (4), identification plate (3), and switch (11) from bracket (9). Discard

lockwasher (4).

3.

Disconnect leads (12) from switch (11).

4. Remove two locknuts (2), screws (10), and bracket (9) from instrument panel (1). Discard

locknuts (10).

1. Install bracket (9) on instrument panel (1) with two screws (10) and new locknuts (2).

2.

Connect leads (12) to switch (11).

3. Position switch (11) and identification plate (3) on bracket (9) and install with new lockwasher (4)

and nut (5).

4. Install lever (6) on switch (11) with new lockwasher (7) and screw (8).

14-114