TM-9-2320-260-20

TRUCK, 5-TON, 6X6, M809 SERIES (DIESEL)

TECHNICAL MANUAL; UNIT MAINTENANCE

APRIL 1995

TM-9-2320-260-20 - Page 339 of 1337

TM 9-2320-260-20

I

3-3. OIL DIPSTICK AND TUBE REPLACEMENT

THIS TASK COVERS:

a. Removal

b. Installation

INITIAL

SETUP

APPLICABLE MODELS

REFERENCES (TM)

All

TM 9-2320-260-10

MATERIALS/PARTS

TM 9-2320-260-20P

Two lockwashers

EQUIPMENT CONDITION

Locking plate

• Parking brake set (TM 9-2320-260-10).

●

Hood raised and secured (TM 9-2320-260-10).

a. Removal

1. Remove dipstick (6) from dipstick tube (7).

2. Remove nut (12), lockwasher (11), washer (10), screw (5), clamp (9), and dipstick tube (7) from

bracket (13). Discard lockwasher (11).

3. , Remove dipstick tube (7) and adapter (8) from engine (1).

4. Remove nut (16), lockwasher (15), washer (14), screw (4), and bracket (13) from bracket (17).

Discard lockwasher (15).

5. Bend tabs of locking plate (2) away from screw (3).

6. Remove screw (3), locking plate (2), and bracket (17) from engine (1). Discard locking plate (2)

1.

2.

3.

4.

5.

6.

7.

Install bracket (17) on engine (1) with new locking plate (2) and screw (3). Tighten screw (3)

20-25 lb-ft (27-34 N•m).

Bend tabs of locking plate (2) over head of screw (3).

Install bracket (13) on bracket (17) with screw (4), washer (14), new lockwasher (15), and nut (16).

Finger tighten nut (16).

Install adapter (8) and dipstick tube (7) on engine (1).

Install clamp (9) and dipstick tube (7) on bracket (13) with screw (5), washer (10), new

lockwasher (11), and nut (12).

Tighten nut (16).

Install dipstick (6) in dipstick tube (7).

3-2