TM-9-2320-260-20

TRUCK, 5-TON, 6X6, M809 SERIES (DIESEL)

TECHNICAL MANUAL; UNIT MAINTENANCE

APRIL 1995

TM-9-2320-260-20 - Page 545 of 1337

TM

9-2320-260-20

4-50.

BATTERY BOX SUPPORTS REPLACEMENT

THIS TASK COVERS:

a. Removal

b. Installation

INITIAL SETUP

APPLICABLE MODELS

REFERENCES (TM)

All

TM 9-2320-260-10

MATERIALS/PARTS

TM 9-2320-260-20P

Twenty locknuts

EQUIPMENT CONDITION

• Parking brake set (TM 9-2320-260-10).

• Battery and battery box removed (para. 4-49).

1.

Remove four locknuts (11), screws (9), and running board (10) from two battery box hangers (7).

Discard locknuts (11).

2. Remove two locknuts (3), screws (5), and splash shield (4) from battery box hangers (7). Discard

locknuts (3).

3. Remove six locknuts (12), screws (8), and battery box support (6) from two battery box hangers (7).

Discard locknuts (12).

4. Remove eight locknuts (1), screws (13), and two battery box hangers (7) from right-

rail (2). Discard locknuts (1).

1.

Install two battery box hangers (7) on right-hand frame rail (2) with eight screws

locknuts (1).

hand frame

(13) and new

2. Install battery box support (6) on two battery box hangers (7) with six screws (8) and new

locknuts (12).

3. Install splash shield (4) on battery box hanger (7) with two screws (5) and new locknuts (3).

4. Install running board (10) on two battery box hangers (7) with four screws (9) and new

locknuts (11).

4-104