TM-9-2320-260-20

TRUCK, 5-TON, 6X6, M809 SERIES (DIESEL)

TECHNICAL MANUAL; UNIT MAINTENANCE

APRIL 1995

TM-9-2320-260-20 - Page 551 of 1337

TM 9-2320-260-20

4-53. FLOODLIGHT WIRING HARNESS REPLACEMENT

THIS TASK COVERS:

a. Removal

b. Installation

INITIAL SETUP

APPLICABLE MODELS

EQUIPMENT CONDITION

M816, M819, M821

MATERIALS/PARTS

• Parking brake set (TM 9-2320-260-10).

●

Hood raised and secured (TM 9-2320-260-10).

• Toolbox removed (para. 11-29).

Ten locknuts

• Battery ground cable disconnected (para. 4-48).

Three lockwashers

REFERENCES (TM)

TM 9-2320-260-10

TM 9-2320-260-20P

NOTE

Tag all wires for installation.

1. Disconnect leads (3) and (5) from connectors (4).

NOTE

Assistant will help with steps 2 and 3.

2. Remove two locknuts (1), screws (14), retainer (13), grommet (6), and lead (5) from firewall (2).

Discard locknuts (1).

3. Remove three locknuts (9), lockwashers (10), screws (7), clamps (8), and floodlight wiring

harness (12) from cab floor (11). Discard locknuts (9) and lockwashers (10).

4-110