TM-9-2320-260-20

TRUCK, 5-TON, 6X6, M809 SERIES (DIESEL)

TECHNICAL MANUAL; UNIT MAINTENANCE

APRIL 1995

TM-9-2320-260-20 - Page 742 of 1337

TM 9-2320-260-20

10-6. FRONT BUMPER STEP REPLACEMENT

THIS TASK COVERS:

a. Removal b. Installation

INITIAL SETUP

APPLICABLE MODELS REFERENCES (TM)

All

TM 9-2320-260-10

MATERIALS/PARTS

Four locknuts

Two lockwashers

TM 9-2320-260-20P

EQUIPMENT CONDITION

Parking brake set (TM 9-2320-260-10).

1. Remove two pinclips (8) and pins (10) from step (9) and bracket (3).

2. Remove two locknuts (5), lockwashers (6), washers (7), screws (11), and step (9) from bracket (3).

Discard locknuts (5) and lockwashers (6).

3. Remove two locknuts (1), screws (4), and bracket (3) from bumper (2). Discard locknuts (1).

1. Install bracket (3) on bumper (2) with two screws (4) and new locknuts (1).

2. Install step (9) on bracket (3) with two screws (11), washers (7), new lockwashers (6), and new

locknuts (5).

3. Install two pins (10) on step (9) and bracket (3) with two pinclips (8).

10-7