TM-9-2320-260-20
TRUCK, 5-TON, 6X6, M809 SERIES (DIESEL)
TECHNICAL MANUAL; UNIT MAINTENANCE
APRIL 1995
TM-9-2320-260-20 - Page 751 of 1337
TM 9-2320-260-20
10-11. PINTLE MOUNT REPLACEMENT (M818)
THIS TASK COVERS:
a. Removal
b. Installation
INITIAL SETUP
APPLICABLE MODELS
EQUIPMENT CONDITION
M818
• Parking brake set (TM 9-2320-260-10).
MATERIALS/PARTS
•
Pintle hook removed (para. 10-9).
Eighteen locknuts
REFERENCES (TM)
TM 9-2320-260-10
TM 9-2320-260-20P
a. Removal
1. Remove four locknuts (17) and screws (8) from reinforcement brackets (14) and braces (5). Discard
locknuts (17).
2. Remove two locknuts (10) and (11), screws (15) and (16), pintle mount (12), and two reinforcement
brackets (14) from crossmember (18). Discard locknuts (10) and (11).
3. Remove four locknuts (9) and screws (13) from two braces (5) and crossmember (18).
4. Remove two locknuts (6), four locknuts (7), two screws (3), four screws (1), two braces (5), and frame
brackets (2) from rails (4). Discard locknuts (6) and (7).
b. Installation
1. Install two braces (5) and frame brackets (2) on rails (4) with two screws (3), four screws (1), two
new locknuts (6), and four new locknuts (7).
2. Install pintle mount (12) on two braces (5) and crossmember (18) with four screws (13) and new
locknuts (9).
3. Install pintle mount (12) on crossmember (18) and two reinforcement brackets (14) with screws (15)
and (16) and new locknuts (10) and (11).
4. Install two reinforcement brackets (14) on braces (5) with four screws (8) and new locknuts (17).
10-16
Back to Top
