TM-9-2320-260-20
TRUCK, 5-TON, 6X6, M809 SERIES (DIESEL)
TECHNICAL MANUAL; UNIT MAINTENANCE
APRIL 1995
TM-9-2320-260-20 - Page 773 of 1337
11-8
TM 9-2320-260-20
THIS TASK COVERS:
a. Removal
b. Installation
INITIAL SETUP
APPLICABLE MODELS
REFERENCES (TM)
All
TM 9-2320-260-10
MATERIALS/PARTS
Ten locknuts
Two lockwashers
TM 9-2320-260-20P
EQUIPMENT CONDITION
.
Parking brake set (TM 9-2320-260-10).
. Headlight removed (para. 4-38).
1.
2.
3.
4.
5.
6.
Remove two locknuts (15), screws (4), and seal mounting bracket (3) from right headlight bracket (1).
Discard locknuts (15).
Remove two locknuts (23), washers (22), screws (25), and side panel (24) from bracket (1). Discard
locknuts (23).
Remove locknut (20), washer (21), and screw (2) from bracket (1) and brace (16). Discard locknut (20).
Remove locknut (13), harness clamp (12), lockwasher (11), screw (19), lockwasher (11), terminal (17),
harness clamp (18), and brace (16) from fender (14). Discard locknut (13) and lockwashers (11).
Remove two locknuts (10), washers (8), screws (7), and washers (8) from bracket (1) and fender (14).
Discard locknuts (10).
Remove two locknuts (9), screws (5), washers (6), and bracket (1) from fender (14). Discard
locknuts (9).
1. Install right headlight bracket (1) on fender ( 14) with two washers (6), screws (5), and new
locknuts (9).
2. Secure bracket (1) to fender (14) with two washers (8), screws (7), washers (8), and new locknuts (10).
3. Install brace (16) on fender (14) with harness clamp (18), terminal (17), new lockwasher (11
screw (19), new lockwasher (11), harness clamp (12), and new locknut (13).
4. Secure brace (16) to bracket (1) with screw (2), washer (21), and new locknut (20).
5. Install side panel (24) on bracket (1) with two screws (25), washers (22), and new locknuts
6. Install seal mounting bracket (3) on bracket (1) with two screws (4) and new locknuts ( 15).
),
23).
11-14
Back to Top
