TM-9-2320-260-20

TRUCK, 5-TON, 6X6, M809 SERIES (DIESEL)

TECHNICAL MANUAL; UNIT MAINTENANCE

APRIL 1995

TM-9-2320-260-20 - Page 765 of 1337

11-4

TM 9-2320-260-20

THIS TASK COVERS:

a. Removal

b. Installation

INITIAL SETUP

APPLICABLE MODELS

EQUIPMENT CONDITION

All

• Parking brake set (TM 9-2320-260-10).

MATERIALS/PARTS

●

Hood raised and secured (TM 9-2320-260-10).

●

Glove compartment removed (para. 11-33).

Eight locknuts

• Personnel heater ducts removed (para. 14-8).

REFERENCES (TM)

GENERAL SAFETY INSTRUCTIONS

TM 9-2320-260-10

Keep fingers clear of hood when replacing hinge.

TM 9-2320-260-20P

WARNING

Keep fingers clear of hood and cowling when replacing hinge.

Failure to do so may result in injury to personnel.

NOTE

Left and right hood hinges are replaced the same way. This

procedure covers the right side only.

Remove eight locknuts (5), screws (2), and hinge (1) from hood (4) and cowling (3). Discard locknuts (5).

Install hinge (1) on hood (4) and cowling (3) with eight screws (2) and new locknuts (5).

FOLLOW-ON TASKS:

●

●

Install glove compartment (para. 11-33).

Install personnel heater ducts (para. 14-8).

11-6