TM-9-2320-260-20
TRUCK, 5-TON, 6X6, M809 SERIES (DIESEL)
TECHNICAL MANUAL; UNIT MAINTENANCE
APRIL 1995
TM-9-2320-260-20 - Page 761 of 1337
TM 9-2320-260-20
I
11-1. BODY AND CAB MAINTENANCE INDEX (Contd)
PARA.
TITLE
PAGE
NO.
NO.
11-31.
Companion Seat Maintenance
11-58
11-32.
Driver’s Seat Replacement
11-62
11-33.
Glove Compartment Replacement
11-63
11-34.
Driver's Seat Cushion, Backrest, Frame, and Seat Adjuster Replacement
11-64
11-35.
Cab Soft Top Turnbuttons and Lashing Hooks Replacement
11-66
11 -2. HOOD REPLACEMENT
THIS TASK COVERS:
a. Removal
b. Installation
INITIAL SETUP
APPLICABLE MODELS
REFERENCES (TM)
All
TM 9-2320-260-10
MATERIALS/PARTS
TM 9-2320-260-20P
Twenty-two locknuts
EQUIPMENT CONDITION
•
Parking brake set (TM 9-2320-260-10).
• Hood raised and secured (TM 9-2320-260-10).
1.
Remove eight locknuts (3), screws (1), and two hinges (2) from hood (4). Remove hood (4) from
vehicle. Discard locknuts (3).
2. Remove eight locknuts (14), screws (5), two reinforcements (15), fasteners (6), and brackets (16)
from hood (4). Discard locknuts (14).
3. Remove two locknuts (10), screws (7), and safety latch (9) from hood (4). Discard locknuts (10).
4. Remove four locknuts (13), washers (12), nuts (11), and two brackets (8) from hood (4). Discard
locknuts (13).
1. Install two brackets (8) on hood (4) with four nuts (11), washers (12), and new locknuts (13).
2. Install safety latch (9) on hood (4) with two screws (7) and new locknuts (10).
3. Install two fasteners (6) and brackets (16) on hood (4) with two reinforcements (15), eight screws (5),
and new locknuts (14).
4. Place hood (4) on vehicle and install on two hinges (2) with eight screws (1) and new locknuts (3).
11-2
Back to Top
