TM-9-2320-260-20

TRUCK, 5-TON, 6X6, M809 SERIES (DIESEL)

TECHNICAL MANUAL; UNIT MAINTENANCE

APRIL 1995

TM-9-2320-260-20 - Page 797 of 1337

TM

9-2320-260-20

11-19. CAB DOOR HANDLES AND LOCK REPLACEMENT

THIS TASK COVERS:

a. Outside Door Handle Removal

d. Cab Door Lack Installation

b. Inside Door Handle Removal

e. Inside Door Handle Installation

c. Cab Door Lock Removal

f. Outside Door Handle Installation

INITIAL SETUP

APPLICABLE MODELS

REFERENCES (TM)

All

TM 9-2320-260-10

MATERIALS/PARTS

TM 9-2320-260-20P

Six screw-assembled lockwashers

EQUIPMENT CONDITION

•

Parking brake set (TM 9-2320-260-10).

●

Cab door access cover removed (para. 11-12).

a. Outside Door Handle Removal

I

1. Remove two screws (1) from outside door handle (8) and door (4).

2. Rotate door handle (8) 1/4-turn counterclockwise and remove horn cab door (4).

Remove screw (5), door handle (3), and washer (2) from cab door lock (7).

1. Remove six screw-assembled lockwashers (6) from cab door (4) and door lock (7). Discard screw-

assembled lockwashers (6).

2. Remove cab door lock (7) through access hole in cab door (4).

1. Position cab door lock (7) through access hole in cab door (4).

2. Install cab door lock (7) on cab door (4) with six new screw-assembled lockwashers (6).

Install washer (2) and door handle (3) on cab door lock (7) with screw (5).

Install outside door handle (8) on cab door (4) with two screws (1).

11-38