TM-9-2320-260-20

TRUCK, 5-TON, 6X6, M809 SERIES (DIESEL)

TECHNICAL MANUAL; UNIT MAINTENANCE

APRIL 1995

TM-9-2320-260-20 - Page 834 of 1337

TM 9-2320-260-20

11-42. GONDOLA WINDSHIELD WIPER BLADE, ARM, AND MOTOR REPLACEMENT

THIS TASK COVERS:

a. Removal

b. Installation

INITIAL SETUP

APPLICABLE MODELS

REFERENCES (TM)

M819

TM 9-2320-260-10

MATERIALS/PARTS

TM 9-2320-260-20P

Lockwasher

EQUIPMENT CONDITION

Parking brake set (TM 9-2320-260-10).

1. Remove screw (3) and wire (2) from windshield wiper motor (1).

2. Remove screw (7) and wiper arm (6) from shaft (14).

3. Remove slotted nut (8) and adapter (9) from shaft (14).

4. Remove nuts (4) and (5), lockwasher (10), washer (11), and seal (12) from shaft (14). Discard

lockwasher (10).

5.

Remove windshield wiper motor (1) from front panel (13).

1. Position windshield wiper motor (1) on front panel (13) and install with seal (12), washer (11),

new lockwasher (10), and nuts (4) and (5).

2. Install adapter (9) and slotted nut (8) on shaft (14).

3. Install wiper arm (6) on shaft (14) with screw (7).

4. Connect wire (2) to windshield wiper motor (1) with screw (3).

11-75