TM-9-2320-260-20
TRUCK, 5-TON, 6X6, M809 SERIES (DIESEL)
TECHNICAL MANUAL; UNIT MAINTENANCE
APRIL 1995
TM-9-2320-260-20 - Page 829 of 1337
TM 9-2320-260-20
I
11-39. WINDSHIELD WASHER JET, TUBING, AND PUMP REPLACEMENT
THIS TASK COVERS:
a. Jet Removal
d. Pump Installation
b. Tubing Removal
e. Tubing Installation
c.
Pump Removal
f. Jet Installation
INITIAL SETUP
APPLICABLE MODELS
REFERENCES (TM)
All
TM 9-2320-260-10
MATERIALS/PARTS
Locknut
TM 9-2320-260-20P
EQUIPMENT CONDITION
• Parking brake set (TM 9-2320-260-10).
Hood raised and secured (TM 9-2320-260-10).
Remove nut (4), rubber washer (3), and jet (2) from cowling (6).
NOTE
Tag all tubing for installation.
1. Remove cover (17), grommet (18), tubing (10), and strainer (16) from reservoir (15).
2. Remove strainer (16) from tubing (10). Remove tubing (10) from grommet (18) and cover (17).
3. Remove strap (20) from tubing (7) and speedometer cable (5).
4. Remove tubing (19), (7), and (10) from tee (8).
5. Remove tubing (1), (7), and (21) from valve (22).
6. Remove tubing (1) and (19) from pump (12).
7. Remove tubing (10) from grommet (14). Remove grommet (14) from dash panel (23).
Remove locknut (9), screw (13), and pump (12) from instrument panel (11). Discard locknut (9).
Install pump (12) on instrument panel (11) with screw (13) and new locknut (9).
I
e. Tubing Installation
I
1. Install grommet (14) in dash panel (23) and install tubing (10) through grommet (14).
2. Install tubing (1) and (19) on pump (12).
3. Install tubing (1), (7), and (21) on valve (22).
4. Install tubing (19), (7), and (10) on tee (8).
5. Install tubing (7) on speedometer cable (5) with strap (20).
6. Install tubing (10) through grommet (18) and cover (17).
7. Install strainer (16) on tubing (10).
8. Install cover (17), grommet (18), tubing (10), and strainer (16) on reservoir (15).
11-70
Back to Top
