TM-9-2320-260-20

TRUCK, 5-TON, 6X6, M809 SERIES (DIESEL)

TECHNICAL MANUAL; UNIT MAINTENANCE

APRIL 1995

TM-9-2320-260-20 - Page 822 of 1337

TM 9-2320-260-20

I

11-33. GLOVE COMPARTMENT REPLACEMENT

I

THIS TASK COVERS:

a. Removal

b. Installation

INITIAL SETUP

APPLICABLE MODELS

REFERENCES (TM)

All

TM 9-2320-260-10

MATERIALS/PARTS

TM 9-2320-260-20P

Seal

EQUIPMENT CONDITION

Adhesive (Appendix C, Item 2)

Parking brake set (TM 9-2320-260-10).

1. Remove two screws (2) and bracket (3) from instrument panel (4).

2. Remove ten screws (9) and glove compartment (1) horn instrument panel (4).

3. Remove four nuts (6), screws (7), and glove compartment door (6) from instrument panel (4).

4. Inspect glove compartment door seal (8). If d-aged, remove seal (8) and clean debris from

mounting surface of seal (8).

NOTE

Perform steps 1 and 2 only if seal was removed.

1. Apply adhesive to mounting surfaces of glove compartment door (6) and seal (8).

2. Install seal (8) on glove compartment door (6).

3. Install bracket (3) on instrument panel (4) with two screws (2).

4. Install glove compartment dwr (6) on instrument panel (4) with four screws (7) and nuts (5).

5. Install glove compartment (1) on instrument panel (4) with ten screws (9).

11-63