TM-9-2320-260-20

TRUCK, 5-TON, 6X6, M809 SERIES (DIESEL)

TECHNICAL MANUAL; UNIT MAINTENANCE

APRIL 1995

TM-9-2320-260-20 - Page 870 of 1337

TM 9-2320-260-20

I

12-17. DUMP BODY SPLASH GUARD REPLACEMENT

THIS TASK COVERS:

a. Removal

b. Installation

INITIAL SETUP

APPLICABLE MODELS

REFERENCES (TM)

M817

TM 9-2320-260-10

MATERIALS/PARTS

TM 9-2320-260-20P

Seven locknuts

EQUIPMENT CONDITION

Parking brake set (TM 9-2320-260-10).

1. Remove two locknuts (6), screws (9), plate (8), and hook (7) from splash guard (5). Discard

locknuts (6).

2. Remove locknut (11), screw (2), and hinge plate (3) from splash guard (5) and dump body (1).

Discard locknut (11).

3. Remove four locknuts (10), screws (4), splash guard (5), and retainer (12) from dump body (1).

Discard locknuts (10).

1.

Install splash guard (5) and retainer (12) on dump body (1) with four screws (4) and new

locknuts (10).

2. Install hinge plate (3) on dump body (1) and splash guard (5) with screw (2) and new locknut (11).

3. Install hook (7) and plate (8) on splash guard (5) with two screws (9) and new locknuts (6).

12-33