TM-9-2320-260-20
TRUCK, 5-TON, 6X6, M809 SERIES (DIESEL)
TECHNICAL MANUAL; UNIT MAINTENANCE
APRIL 1995
TM-9-2320-260-20 - Page 861 of 1337
TM 9-2320-260-20
I
12-13. DUMP BODY TAlLGATE CONTROL LINKAGE MAINTENANCE
THIS TASK COVERS:
a. Removal
c. Adjustment
b. Installation
INITIAL SETUP
APPLICABLE MODELS
REFERENCES (TM)
M817
TM 9-2320-260-10
MATERIAIS/PARTS
TM 9-2320-260-20P
Twenty locknuts
EQUIPMENT CONDITION
Two woodruff keys
●
Parking brake set (TM 9-2320-260-10).
●
Dump body raised and safety braces in place
(TM 9-2320-260-10).
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
Place tailgate control lever (15) to open position to release tailgate (24) (TM 9-2320-260-10).
Remove two locknuts (6), screws (2), and washers (4) from brackets (3) and levers (5) and (15).
Discard locknuts (6).
Remove two locknuts (7) and screws (14) from levers (5) and (15). Discard locknuts (7).
Remove two levers (5) and (15) from cross-shaft (17).
Remove six locknuts (8), screws (11), and three brackets (9) from mounting brackets (10). Discard
locknuts (8).
Remove cross-shaft (17) from dump body (28).
Remove two nuts (1) and brackets (3) from control rods (13).
Remove two woodruff keys (16) from cross-shaft (17). Discard woodruff keys (16).
Remove two nuts (12) from control rods (13).
Remove four locknuts (21), two link plates (20) and (29), and ten washers (19) from two control rods
(13) and control bars (18). Discard locknuts (21).
11. Remove six locknuts (22), screws (23), and two tailgate latch brackets (25) with control
from dump body (28). Discard locknuts (22).
12. Remove two control rods (13) from dump body (28).
13. Remove four pins (27), two control bars (18), and latches (26) from latch brackets (25).
bars (18)
12-24
Back to Top
