TM-9-2320-260-20

TRUCK, 5-TON, 6X6, M809 SERIES (DIESEL)

TECHNICAL MANUAL; UNIT MAINTENANCE

APRIL 1995

TM-9-2320-260-20 - Page 909 of 1337

TM 9-2320-260-20

I

12-34. 3-PHASE AND 400 HZ RECEPTACLES REPLACEMENT

THIS TASK COVERS:

a. 3-Phase Receptacle Removal

c. 3-Phase Receptacle Installation

b. 400 Hz Receptacle Removal

d. 400 Hz Receptacle Installation

INITIAL SETUP

APPLICABLE MODELS

EQUIPMENT CONDITION

M820, M820A1, M820A2

• Parking brake set (TM 9-2320-260-10).

REFERENCES (TM)

TM 9-2320-260-10

TM 9-2320-260-20P

• Battery ground cable disconnected (para. 4-48).

NOTE

Tag all wires for installation.

a. 3-Phase Receptacle Removal

1. Remove two screws (4) and cover (3) from receptacle (5).

2. Remove two screws (2) and receptacle (5) from receptacle box (1).

3. Remove four screws (6) and wires (7) from receptacle (5).

b. 400 Hz Receptacle Removal

NOTE

Tag all wires for installation.

1. Remove screw (11) and cover (10) from receptacle (12).

2. Remove two screws (9) and receptacle (12) from receptacle box (8).

3. Remove three screws (13) and wires (14) from receptacle (12).

c. 3-Phase Receptacle Installation

1. Install four wires (7) on receptacle (5) with four screws (6).

2. Install receptacle (5) on receptacle box (1) with two screws (2).

3. Install cover (3) on receptacle (5) with two screws (4).

d. 400 Hz Receptacle Installation

I

1. Install three wires (14) on receptacle (12) with three screws (13).

2. Install receptacle (12) on receptacle box (8) with two screws (9).

3. Install cover (10) on receptacle (12) with screw (11).

12-72