TM-9-2320-260-20

TRUCK, 5-TON, 6X6, M809 SERIES (DIESEL)

TECHNICAL MANUAL; UNIT MAINTENANCE

APRIL 1995

TM-9-2320-260-20 - Page 917 of 1337

TM 9-2320-260-20

12-38. BONNET CONTROL ROD REPLACEMENT

THIS TASK COVERS:

a. Removal

b. Installation

INITIAL SETUP

APPLICABLE MODELS

REFERENCES (TM)

M820, M820A1, M820A2

TM 9-2320-260-10

MATERIALS/PARTS

TM 9-2320-260-20P

Two cotter pins

EQUIPMENT CONDITION

Locknut

Parking brake set (TM 9-2320-260-10).

1. Remove cotter pin (1), washer (2), and control rod (6) from control lever (4). Discard cotter pin (1).

2. Remove cotter pin (8) and control rod (6) from bonnet door bracket (7). Discard cotter pin (8).

3. Remove locknut (3) and control lever (4) from control lever mounting bracket (5). Discard locknut (3).

b. Installation

1.

Install control lever (4) on control lever mounting bracket (5) with new locknut (3).

2. Install control rod (6) on bonnet door bracket (7) with new cotter pin (8).

3. Install control rod (6) on control lever (4) with washer (2) and new cotter pin (1).

12-80