TM 9-2320-260-20
12-39. HINGED ROOF BLACKOUT PLUNGERS REPLACEMENT
THIS TASK COVERS:
a. Removal
b. Installation
INITIAL SETUP
APPLICABLE MODELS
EQUIPMENT CONDITION
M820, M820A1, M820A2
•
Parking brake set (TM 9-2320-260-10).
REFERENCES (TM)
• Battery ground cable disconnected (para. 4-49).
• Van body side panels expanded
TM 9-2320-260-10
(TM 9-2320-260-10).
TM 9-2320-260-20P
a. Removal
1. Remove four screws (1) and plunger (2) from roof panel (3).
2. Remove two screws (4) and wires (5) from plunger (2).
3. Remove two screws (6) and plate (7) from van floor panel (8).
b. Installation
1. Install plate (7) on van floor panel (8) with two screws (6).
2. Install two wires (5) on plunger (2) with two screws (4).
3. Install plunger (2) in roof panel (3) with four screws (1).
12-82