TM-9-2320-260-34-1

TRUCK, 5-TON, 6X6, M809 SERIES (DIESEL)

TECHNICAL MANUAL; DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE; VOLUME 1 OF 2

JULY 1994

TM-9-2320-260-34-1 - Page 130 of 657

TM 9-2320-260-34-1

3-24. ENGINE AND TRANSMISSION REPLACEMENT (Contd)

CAUTION

Cap or plug all openings immediately after disconnecting lines

and hoses to prevent contamination. Remove cap or plugs prior to

installation. Failure to do so may result in damage to equipment.

NOTE

• Tag all hydraulic lines for installation.

• Have drainage container ready to catch hydraulic fluid.

8. Remove clamp (2) and return hose (3) from pump elbow (1).

9. Disconnect pressure hose (4) from adapter (5) on power steering pump (7).

10.

Remove adapter (5) and packing (6) from power steering pump (7). Discard packing (6).

NOTE

Perform step 11 if vehicle is equipped with personnel heater kit.

11.

Loosen clamps (9) and (12) and remove hoses (8) and (13) from valves (10) and (11).

3-78