TM-9-2320-260-34-1

TRUCK, 5-TON, 6X6, M809 SERIES (DIESEL)

TECHNICAL MANUAL; DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE; VOLUME 1 OF 2

JULY 1994

TM-9-2320-260-34-1 - Page 452 of 657

TM 9-2320-260-34-1

7-4. REAR WIRING HARNESS REPLACEMENT (Contd)

9.

10.

11.

12.

13.

14.

15.

16.

NOTE

s Step 9 through 16 apply to M819 vehicles.

c Receptacle cover must be lifted and held open to install top two

screws.

Install trailer receptacle (11) and cover (9) on rear bracket (8) with four screws (10) and new

locknuts (12).

Place clamp (7) over rear wiring harness (13) and install on bracket (5) with screw (6) and new

locknut (4).

Install two wires (1) on rear crossmember (14) with screw (3), new lockwasher (2), and new

locknut (15).

NOTE

Receptacle cover must be lifted and held open to install top two

screws.

Install harness receptacle (31) and cover (29) on body (28) with four screws (30) and new

locknuts (32).

Place clamps (24) and (27) over rear wiring harness (13) and install on rear left fender (34) with two

screws (33), four washers (26), and two new locknuts (25).

Place clamps (21) and (23) over rear wiring harness (13) and install on subframe (20) with two

screws (22) and new locknuts (19).

Place clamp (16) over rear wiring harness (13) and install on clip extension (17) with screw (18) and

new locknut (40).

Install two wires (39) on left frame rail (35) with screw (36), new lockwasher (37), and new

locknut (38).

7-34