TM 9-2320-260-34-1
8-6. TRANSMISSION MAINTENANCE (Contd)
61. Remove filler plug (4) and drainplug (5) from transmission case (1).
62. Remove seven studs (9) from transmission case (1).
63. Remove six studs (8) from transmission case (1).
b. Cleaning and Inspection
1.
For general cleaning instructions, refer to para. 2-8.
2.
For general inspection instructions, refer to para. 2-9.
3. Inspect transmission bearing bores (2), (3), (6) and (7) for wear. Refer to table 8-1, Wear Limits, for
measurements. Replace transmission case (1) if bores (2), (3), (6), or (7) are worn past limits.
ITEM
NO.
2
3
6
7
Table
8-1.
Wear Limits.
ITEM/POINT OF MEASUREMENT
Inside diameter
Inside diameter
Inside diameter
Inside diameter
WEAR LIMITS/TOLERANCES
INCHES
MILLIMETERS
4.7239-4.7249
119.9871-120.0012
4.3302-4.3312
109.9871-110.0125
3.3465-3.3475
85.0011-85.0265
5.5118-5.5130
139.9972-140.0302
8-22