TM-9-2320-260-34-1

TRUCK, 5-TON, 6X6, M809 SERIES (DIESEL)

TECHNICAL MANUAL; DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE; VOLUME 1 OF 2

JULY 1994

TM-9-2320-260-34-1 - Page 644 of 657

TM 9-2320-260-34-1

11-8. SERVICE BRAKE PEDAL LEVER AND BRACKET MAINTENANCE (Contd)

b. Cleaning and Inspection

1. For general cleaning instructions, refer to para. 2-8.

2. For general inspection instructions, refer to para. 2-9.

1.

2.

3.

4.

5.

6.

7.

8.

NOTE

Perform step 1 if bearing or bushings were removed.

Using arbor press, install new bushings (21) and (20) in main support bracket (5) and new

bearing (18) in actuating lever (17).

Install actuating lever (17) on main support bracket (5). Aline lube hole in tube (19) with lube hole

in main support bracket (5) and install tube (19) in main support bracket (5).

Install lubrication fittings (22) in main support bracket (5).

Position main support bracket (5) over end of hydraulic line (10) and install on frame (11) with four

screws (13), new locknuts (6), two screws (16), and new locknuts (7).

Install hydraulic line (10) on tee (15).

Install bracket (9) on frame (11) with screw (12) and new locknut (8).

Install lever support (2) on frame (11) with screw (1) and new locknut (14).

Install liner support (2) on main support bracket (5) with screw (4) and new locknut (3).

11-32