TM-9-2320-260-34-2
TRUCK, 5-TON, 6X6, M809 SERIES (DIESEL)
TECHNICAL MANUAL; DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE; VOLUME 2 OF 2
JULY 1994
TM-9-2320-260-34-2 - Page 130 of 863
TM 9-2320-260-34-2
15-21. SAFETY BRACE REPLACEMENT
THIS TASK COVERS:
a. Removal
b. Installation
lNITIAL SETUP
APPLICABALE MODELS
REFERENCES (TM)
M817
TM 9-2320-260-10
MATERIAIS/PARTS
General mechanic’s tool kit
(Appendix B, Item 1)
MATERIALS/PARTS
Lockwasher (Appendix D, Item 224)
TM 9-2320-260-34 P-1
EQUIPMENT CONDITION
• Parking brake set (TM 9-2320-260-10).
• Dump body in lowered position
(TM 9-2320-260-10).
a. Removal
1.
Remove nut (4), lockwasher (3), and screw (6) from hinge pin (1) and bracket (2). Discard
lockwasher (3).
2. Using punch and hammer, remove hinge pin (1) from bracket (2).
3. Remove safety brace (5) from bracket (2).
b. Installation
1.
Position safety brace (5) in bracket (2) with hinge pin (1) hole alined with hole in bracket (2),
2.
Insert hinge pin (1) in bracket (2) through safety brace (5) and install with screw (6), new
lockwasher (3), and nut (4).
15-69
Back to Top
